5464-716A 美国WOODWARD PLC控制器
价格：面议
伍德沃德公司于1870年由阿莫斯伍德沃德公司作为伍德沃德州长公司创立。起初，伍德沃德州长公司对水轮进行控制（项号103813），然后转向水力涡轮机。在20世纪20年代和30年代，伍德沃德开始设计柴油和其他往复式发动机，以及工业涡轮机的控制装置。
Woodward & Company was founded in 1870 by Amos Woodward & Company as Woodward Governor & Company. At first, Governor Woodward controlled the water wheel (first patent no. 103813) and then switched to a hydraulic turbine. In the 1920s and 1930s, Woodward began designing diesel and other reciprocating engines, as well as controls for industrial turbines.
The Woodward5009 fault tolerant controller is designed for critical turbine controls that require high reliability. It can be configured for pure coagulation, back pressure or single pump/feed turbine applications. The 5009's CPU and I/O(TMR) are triple-redundant to meet the reliability requirements of the industrial turbine market. 500 is in place programmable mode, using menu-type software to guide engineers to program for power generation or mechanical driven applications. 5009 can work independently or in combination with factory DCS.
Woodward505 electronic governor is used to control the speed of turbine compressor. The Woodward 505 control system, designed and manufactured by Woodward, is microprocessor-based and can be used in steam turbines with either one or two actuators. The Woodward 505 control system has two modes of operation: programming mode and running mode. Programming mode is used to select the controller internal configuration and operation mode Settings; The operation mode is controlled according to the program set. Steam turbine electronic governor; Steam turbine electromechanical hydraulic converter; The output control signal of Wood Ward505 is converted into hydraulic signal through I/H converter to control the opening of steam turbine compressor's main steam door, so as to control the turbine compressor speed. Woodward Electronic Governor Woodward 505, Woodward 505E, Woodward 505C, Woodward 505H; Controller 2301D-ST AtlasPCTM MicroNetTMNetSimTM Software HMI 5009505/505E 505View Software PEAK150; Ug-5.7,-8,&-10 UG40 governor; PGPL UG UG40 CPC; Woodward 505, Woodward 505E, Woodward 505C, Woodward 505H, TG-13
WOODWARD CPC, 8901-457 electro-hydraulic converter
Woodward CPC (8901-457), a 4-20mA control signal is linearly proportional to the oil pressure output. The Woodward CPC is compatible with many electronic controls, such as the Woodward 505E controller. It is suitable for pressure servo system or single acting power cylinder. CPC is also applicable to old machine transformation projects.
