A9904-111 美国WOODWARD CPU处理器
价格：面议
美国伍德沃德Woodward505电子调速器用于控制透平压缩机的转速。 Woodward 505控制系统由美国Woodward公司设计生产，该系统控制器以微处理器为基础实现控制，可用于单个或双个执行机构的蒸汽轮机。 Woodward 505控制系统有两种操作方式：编程模式和运行模式。编程模式用于选择控制器内部配置及运行方式的设置；运行模式则根据设定的程序实现控制。汽轮机电子调速器；汽轮机电液转换器；Wood Ward505输出的控制信号经过I/H转换器转换成液压信号来控制蒸汽透平压缩机主蒸汽门的开度，以达到控制透平压缩机转速的目的。伍德沃德(woodward)产品，伍德沃德电子调速器woodward505,伍德沃德 woodward505e,伍德沃德 woodward505c,伍德沃德woodward505h；控制器 2301D-ST AtlasPCTM MicroNetTM NetSimTM软件 人机界面（HMI） 5009 505/505E 505View软件 PEAK150 ； 机械调速器 TG PG PG-PL UG-5.7,-8,&-10 UG40调速器；执行器 EHPC EML100 TM25／- 200LP 液压放大器 TG13E/TG17E PGPL UG UG40 CPC；woodward 505,woodward 505e,woodward 505c,woodward 505h， TG-13
Woodward has more than 130 years of experience in the design and manufacture of engine controllers used in aerospace, industrial engines, turbines, and power generation controls.
The Woodward G-3P actuator in the hydraulic amplifier converts the electrical control signal into a rotational output, which is then hydraulically amplified to control the servo position output. Hydraulic amplifiers are suitable for steam turbines or large engines with relatively large actuating force.
The WOODWARDTG governor is a self-contained, independent oil source, mechanical hydraulic differential governor for small steam turbines that do not require synchronous (constant speed) operation.
Woodward PG-PL governors are widely used for speed control, drive pumps and compressors in all types of diesel engines, gas engines and steam turbines.
Woodward PPL actuators are used in gas engines or steam turbines to replace PGPL, PGL, and PGD governors without changing the original PG drive linkage. This provides convenience for electric adjustment and transformation.
The Woodward 2301D-ST is microprocessor based with internal software designed specifically for single-valve steam turbine control. In order to facilitate the replacement of the controller, the arrangement of wiring ports of 2301D-ST is basically the same as that of 2301A controller. 2301D-ST controller can complete the core control of small steam turbine system. Its internal application software is field programmable to accommodate different configuration needs. Due to the enhanced function, the 2301D-ST has more input/output ports than the 2301A, and is equipped with a communication serial port, which greatly facilitates the communication between the controller and PLC or DCS control system.
The woodward2301D and 2301d-ec are based on microprocessor control and have the same functions as the 2301ALSSC: load distribution and speed control. The computer is connected to 2301D and 2301D-EC controllers through a 9-pin serial plug (RS232 port).
The Woodward5009 fault tolerant controller is designed for critical turbine controls that require high reliability. It can be configured for pure coagulation, back pressure or single pump/feed turbine applications. The 5009's CPU and I/O(TMR) are triple-redundant to meet the reliability requirements of the industrial turbine market. 500 is in place programmable mode, using menu-type software to guide engineers to program for power generation or mechanical driven applications. 5009 can work independently or in combination with factory DCS.
Woodward Governor Company Woodward Governor Company
Woodward505 electronic governor is used to control the speed of turbine compressors.
The Woodward505 control system is designed and manufactured by Woodward, Inc., USA. The system controller is microprocessor-based and can be used for a single or double actuator steam turbine. woodward 505,woodward505e,woodward505c,woodward505h,
