A8271-610 美国WOODWARD 伺服位置控制
价格：面议
伍德沃德公司于1870年由阿莫斯伍德沃德公司作为伍德沃德州长公司创立。起初，伍德沃德州长公司对水轮进行控制（项号103813），然后转向水力涡轮机。在20世纪20年代和30年代，伍德沃德开始设计柴油和其他往复式发动机，以及工业涡轮机的控制装置。
The WOODWARD Current-pressure Converter (CPC) is designed to control steam valves, fuel valves and/or corresponding servomotors by converting 4-20mA control signals linearly and proportionately to oil pressure output. CPC can be used with many electronic controls such as WOODWARDMicroNet or 505 series controllers. It is suitable for pressure servo system or single acting power cylinder. CPC is also applicable to old machine transformation projects.
WoodwardTG-13 and TG-17 are mechanical hydraulic differential governors used to control steam turbines - places that do not require synchronous (constant speed) operation. The maximum rotation Angle of tg-13 and TG-17 governor output shaft is 40°. The recommended turning stroke from no load to full load is 2/3 of the governor's full stroke. The WOODWARDTG-13E and TG-17E electro-hydraulic actuators are self-contained, self-contained oil sources for steam turbines requiring differential speed control, load distribution, or other functions, and are compatible with all WOODWARD electronic controllers and accessories.
WOODWARD Servo Position Controller (SPC) is a servo valve driver that accepts DeviceNet or 4-20mA position command signals from the system controller and can position proportional or integral servo valves. SPC is capable of meeting the control precision, responsiveness and redundancy requirements of steam or gas turbine fuel control valves.
WoodwardProTech? The 203 overspeed protection system provides overspeed protection for steam turbines, gas turbines, or other prime movers by monitoring signals from three independent reluctance transmitters (MPUs). In particular, ProTech203 can be used instead at high speeds (>10,000 RPM) where mechanical overspeed protection has become unreliable. The sensor used to detect the actual speed is usually the Woodward Reluctance speed sensor (MPU).
WOODWARD CPC, 8901-457 electro-hydraulic converter
Woodward CPC (8901-457), a 4-20mA control signal is linearly proportional to the oil pressure output. The Woodward CPC is compatible with many electronic controls, such as the Woodward 505E controller. It is suitable for pressure servo system or single acting power cylinder. CPC is also applicable to old machine transformation projects.
Woodward505 electronic governor is used to control the speed of turbine compressor. The Woodward 505 control system, designed and manufactured by Woodward, is microprocessor-based and can be used in steam turbines with either one or two actuators. The Woodward 505 control system has two modes of operation: programming mode and running mode. Programming mode is used to select the controller internal configuration and operation mode Settings; The operation mode is controlled according to the program set. Steam turbine electronic governor; Steam turbine electromechanical hydraulic converter; The output control signal of Wood Ward505 is converted into hydraulic signal through I/H converter to control the opening of steam turbine compressor's main steam door, so as to control the turbine compressor speed. Woodward Electronic Governor Woodward 505, Woodward 505E, Woodward 505C, Woodward 505H; Controller 2301D-ST AtlasPCTM MicroNetTMNetSimTM Software HMI 5009505/505E 505View Software PEAK150; Ug-5.7,-8,&-10 UG40 governor; PGPL UG UG40 CPC; Woodward 505, Woodward 505E, Woodward 505C, Woodward 505H, TG-13
As of 2007, Governor Woodward is a $1 billion company with offices around the world, including: Japan, China, Europe and many other companies. On January 26, 2011, the Company announced that shareholders had approved the name change to its current name.
