西门子6SL3120-1TE15-0AA3上海赞国科技 驱动模块
价格：面议
西门子官F采购渠道给您放心品质。
名称 CBC10 (CAN-Bus 接口板) CBE20 (CU320 ProfiNet 通讯板) CBE30 (Simotion D ProfiNet 通讯板) DMC20 (Drive-CLiQ HUB 模块)
外形
订货号 6SL3055-0AA00-2CA0 6SL3055-0AA00-2EB0 6FC5312-0FA00-0AA0 6SL3055-0AA00-6AA0
功能 CAN-Bus 通讯接口板 CU320 Profinet 通讯接口板 SimotionＤ Profinet 通讯接口板 Drive-CLiQ HUB 模块
特征
(1) 直接插入 CU320 插槽中
(2) 1 个 SUB-D 针连接器。
(3) 1 个 SUB-D 孔连接器。
(4) CAN Bus 通讯。
(1) 直接插入 CU320 插槽中。
(2) 4 RJ45 插孔及 4 个相应的端口开
关。
(3) 支持 RT/IRT 的 Profinet。
(1) 直接插入 Simotion D 插槽中。
(2) 4 RJ45 插孔及 4 个相应的端口开
关。
(3) 支持 RT/IRT 的 Profine。
(1) 通过 Drive-CLiQ 连接。
(2) 6 个 Drive-CLiQ 插槽，可以连接 5
个 Drive-CLiQ 装置。
(3) 1 个 DC 24V 电源连接端子。
(4) 用于驱动轴的并行连接
Flexibility for successful machine concepts
As part of the SINAMICS drive family, the SINAMICS S120 drive is a modular system for high-performance applications in machine and plant engineering. SINAMICS S120 offers high-performance single-axis and multi-axis drives for a very broad range of industrial applications. By virtue of its scalability and flexibility, SINAMICS S120 is the ideal system for satisfying the ever increasing demand for more axes and better performance. SINAMICS S120 supports flexible machine designs and speedy implementation of customized drive solutions.
The response to ever increasing demands
Modern machines must be built at ever lower cost, but deliver ever greater productivity. The SINAMICS S120 drive concept meets both these challenges! It is easy to configure and thus helps reduce project completion times. Its excellent dynamic response and accuracy permit higher cycle rates for maximum productivity.
Applications in machine and plant engineering
Regardless of whether the application involves continuous material webs or cyclic, highly dynamic processes – SINAMICS S120 means increased machine performance in many industries:
Packaging machines
Plastics processing machines
Textile machines
Printing machines
Paper machines
Woodworking machines
Hoists and cranes
Handling and assembly systems
Machine tools
Rolling mills
Test stands
Machinery associated with renewable energy applications
Modularity for mechanical engineering
SINAMICS S120 is designed to allow free combination of power and control performance. Multi-axis drives with higher-level motion control can be implemented with the SINAMICS S120 modular system as easily as single-drive solutions.
Greater flexibility with central control intelligence
On the SINAMICS S120, the drive intelligence is combined with closed-loop control functions into Control Units.
These units are capable of controlling drives in Vector, Servo and V/f modes. They also perform the speed and torque control functions plus other intelligent drive functions for all axes on the drive.
基本特征
¾ 能够接 TN、IT、TT 电网
¾ 电源为 3 相 AC380-400V 时，功率从 0.37-90Kw
¾ 电源为 1 相 AC200-240V 时，功率从 0.12-0.75Kw
¾ 整流部分为二极管，能量不能回馈电网
¾ 内置制动单元，通过外接制动电阻实现电机的快速制动
¾ 集成了安全功能“安全扭矩停车”
¾ 有内置电源滤波器和不含电源滤波两种规格
7.1.3 抱闸继电器/安全抱闸继电器
当 PM340 驱动带有抱闸的电机时，使用抱闸继电器或安全抱闸继电器。安全抱闸继电器的控制符合 EN954-1 安全级
别 3 和 IEC61508SIL2。
抱闸继电器
(6SL3252-0BB00-0AA0 包括连接至 PM340 上的电缆和连接器)
安全抱闸继电器
(6SL3252-0BB01-0AA0 包括连接至 PM340 上的电缆和连接器)
过载能力
SINAMICS S120 变频装置具有应对颠覆转矩的过载能力。如果存在更大的峰值负载，那么必须在组态时考虑这种情况。因此，在具有过载要求的驱动器中，必须将合适的基本负载电流用作所需负荷的基础。
允许的过载水平在以下前提条件下有效，驱动单元在过载条件之前和之后以其基本负载电流运行，且占空比持续时间为 300 s。
另一个先决条件是，变频装置或逆变装置在其出厂设置脉冲频率下运行，输出频率大于 10 Hz。
对于负载周期内负载变化较大的临时、周期性负载周期，必须注意《SINAMICS 低压工程手册》的相关部分。
变频装置和逆变装置
基于负载电流低负荷 IL，允许 110 % 的过载 60 s 或 150 % 用于 10 s。
概述
由于带有分开的电源装置和控制单元，SINAMICS S120 变频调速柜系统可地满足大量不同驱动任务的要求。
控制单元根据要控制的驱动器数量和所需性能级别进行选择，而电源装置的额定值必须要满足系统的电能要求。控制单元和电源装置之间的连接可非常简便地使用数字系统接口 DRIVE‑CLiQ 来完成。
