MPS MP1603GTF-Z芯源MPS芯片
价格：面议
产品规格：
产品数量：
包装说明：
关 键 词：MP1603GTF-Z芯源MPS芯片,MPS
行 业：电子 电子产品设计
发布时间：2021-12-01
Silicon and Package Innovation
1st gen
2nd gen
3rd gen
• First 2A/3A sync Buck in SOIC8
(5x6mm) pkg in the world – since 2005
• More than 20+ p2p competitors
• First 2A /3A sync Buck in SOT23
(3x3mm) pkg in the world – since 2011
• TI also dev. P2P part
• Other 5+ p2p competitors
• First 2A /3A sync Buck in SOT563/SOT583
(1.6x1.6mm) pkg in the world – since 2015
MPS has lead the DC/DC market over the last 10 years with advanced BCD
device process and assembly/packaging technology.
Additionally, MPS also offers industry-leading power converters in
QFN and CSP packages
MPQ5850 42V Smart Diode Controller
• -40V Reverse input protection
• 3V to 42V Startup Voltage
• Low Quiescent Current
• 25uA operating, 3.5uA shutdown
• Very fast transient response
• Rectifies input AC up to 100kHz
• 20mV forward voltage drop
• Strong gate drive
• 100mA (min) pull up current
• 400mA (min) pull down current
• Reservoir capacitor keeps gate on at very
low input voltages
• SOT23-8 • 25µA steady state current
• 3µA shutdown current
• Meets automotive ISO7637 transient
requirements with a suitable TVS Diode
FEATURES
APPLICATIONS
• Automotive system protection
• Automotive ADAS systems-camera
• Automotive infotainment systems-digital
cluster, head unit
• Battery powered systems
MPQ7908/28 - 18V, 4 Rail Power Management IC with Safety Monitoring
Key FEATURES
• 3 Synchronous Buck Regulators
− 2x 600mA
− 1x 1A
• 1 LDO Rail (200mA)
• Integrated safety functions (for MPQ70240FS only)
Analog built in self-test
Memory/OTP CRC check
Reference monitor
• Rich Protections
OCP/SCP, Vo OVP&UVP, Thermal warning/shutdown
• Symmetric input cap for better EMI
• PMBus/I2C Compliant interface with PEC to program
Dynamic adjustment Vo
Adjustable on/off delay, soft start time
Flexible PG indicator configuration
Light load mode selection
Configurable frequency spread spectrum for better EMI KEY SPECS
Input Voltage 3.5V – 18V
Output Current 600mA, 600mA, 1A, 200mA
Switching Freq. 2.2MHz / 3.3MHz
Package QFN-15 (2.5mmx3.5mm),
Wettable flank
MP2147 – 4A, Sync, Step-Down Switcher
FEATURES
• Wide 2.8V-to-5.5V Operating Input Range
• Adjustable Output from 0.6V
• Up to 4A Output Current
• Low IQ: 40μA • 1.2MHz Switching Frequency
• EN for Power Sequencing
• 1% FB Accuracy
• External PWM/PFM Mode Control
• COT control offers fast transient response
• External VCON Control
• 22mΩ and 14mΩ Internal Power MOSFETs
• 1.5ms Internal SS Time with Pre-Bias Startup
APPLICATIONS
• Portable Instruments
• Storage
• Battery-Powered Devices
• High performance DSPs, FPGAs
MPQ3367 6CH Backlighting LED Driver
• 3.5V to 36V Input Voltage Range
• 6 Channels with Max. 150mA per Channel
• Internal 100mΩ, 50V MOSFET
• Programmable Up to 2.2MHz Fsw
• Multi-Dimming Operation Mode thru PWM input
Including:
1. Direct PWM Dimming
2. Analog Dimming
3. Mix Dimming with 25%/12.5% transfer point
• 15000:1 Dim Ratio in PWM Dim at
Fpwm≤200Hz
• Excellent EMI Performance, Frequency Spread
Spectrum
• I2C Interface
• Phase Shift Function for PWM Dimming
• 2.5% Current Matching
• Optional LED Current Auto Decrement at
High Temperature
• LED Short/Open, OTP, OCP, Inductor
Short Protection
• Fault Indicator Signal Output
• QFN24-4mmX4mm and TSSOP28-EP Package
• AEC-Q100
MP6604A/B/C: Dual H-bridge Stepper Motor Drivers Applications FEATURES 4.5V to 45V Operating Input Voltage Range 2.5A Maximum Output Current Dual Full H-Bridge Low On Resistance: 150mΩ per FET oThe MP6604A has separate IN and EN pins for each output pin. oThe MP6604B has PHASE, ENBL, and BRAKE input signals for each H- bridge. oThe MP6604C has separate HS and LS input pins for each output pin. Protection Functions, including: oOver-Current Protection oOver- and Under-voltage Protection oOver Temperature Shutdown oFault Indication Output 28-pin 4mm x 5mm QFN and 28-pin TSSOP EP Packages • Bipolar Stepper Motors • Stage Lighting • 3D Printers • Laser Printers & Copiers • Textile Machines
