CO2 compressor Backup Ring DRESSER
价格：777.00起
产品规格：
产品数量：
包装说明：
关 键 词：CO2,compressor
行 业：机械 泵 往复泵
发布时间：2021-08-11
If your factory uses a Chinese-made compressor that needs to be replaced or maintained, we can provide ready-made parts and components or services (you only need to provide the factory name and model of the Chinese compressor).
The packing rings are the important element of rod packing assembly. The below-listed
packing rings are widely used in a reciprocating compressor.
The compressor can use narrow piston, due to the use of narrow piston larger valve area for greater efficiency.
The crankshaft is connected to drive, to transfer the rotary motion.
When force lubrication is used, drilled oil passage is provided in the crankshaft.
Tangent Ring切线环
The tangent ring is cut into three segments so that each cut lies on the side of an
equilateral triangle. The cuts of this ring maintain sealing contact regardless of
variations of the ring’s inside diameter. If wear occurs in the tangent ring, the
garter spring will tighten the ring segments to compensate for the wear.
For the larger capacity compressor, cylinders are provided with replaceable linear.
In smaller capacity compressors, particularly for single stage models the replaceable liner is not economical and may not be available.
The cylinders are equipped for the cooling arrangement to reduce the temperature rise during the compression cycle. This is usually by means of a water jacket if water jacketing in the cylinder is not feasible than fins are provided in the cylinder for air cooling. The latter method is limited to either small or special purpose machines.
