美国杜邦PA66 HTN51G30L批发 送货上门
价格：26.00起
产品规格：
产品数量：
包装说明：
关 键 词：HTN51G30L批发,美国杜邦PA66
行 业：塑料 通用/工程塑料 工程塑料
发布时间：2021-07-05
晶宏塑胶的经营理念：诚信经营，顾客至上；
晶宏塑胶的政策：客户的一份满意，我们的不遗余力；
晶宏塑胶的宗旨：为客户提品，良好的技术支持，健全的 ；晶宏塑胶竭诚于每一位客户，真诚期待与你合作，共创发展，共赢未来
PA66工艺：干燥处理：如果加工前材料是密封的，那么就没有必要干燥。然而，如果储存容器被打开，那么建议在 85℃ 的 热空气中干燥处理。如果湿度大于 0.2%，还需要进行105℃，12 小时的真空干燥。 熔化温度：260~290℃。对玻璃添加剂的产品为275~280℃。熔化温度应避免高于 300℃。
PA66 processing mold temperature: recoended 80 ℃. Mold temperature will aff the crystallinity, which will aff the physical properties of the product. For thin-walled pstic parts, if the mold temperature is lower than 40 ℃, the crystallinity of the pstic parts will change with time. In order to maintain the geometric stability of the pstic parts, annealing treatment is needed.
Zytel PA66 / 6 uses pstics for sporting goods:
Helmet manucturer DXL protion chooses DuPont ™ Zytel Nylon resin is due to its high resistance, rigidity and toughness. This super tough nylon is reinforced with 33% gss fiber. The four helmet parts made with Zytel are the , the C-shaped "buckle" around the head and two side s. The patented four part design makes the helmet more suitable for the head than the traditional one part helmet.
The development of PA66: in the te 1940s, Dopont company in the United States realized the industrial production of PA66. At present, there are more than 20 kinds of nylon resins in the world aording to their structures, with more than 800 brand numbers. The product ne is determined by the number of carbon atoms in the repeating unit of nylon macromolecule. The general formu can be written as nylon or Pa. There are PA6, PA66, PA11, PA12, PA610, pa612, PA1010, PA46, PA6T, PA9T, etc. ong them, PA6 and PA66 are the main varieties, aounting for about 92% of the total ount of PA engineering pstics.
PA66应用领域：
1、广泛应用于机械、仪器仪表、汽车部件、电子电气、铁路、家电、通讯、纺机、休闲用品、油管、油箱及一些精密工程制品。
2、电子电器：连接器、卷线轴、计时器、护盖断路器、开关壳座
汽车： 散热风扇、门把、油箱盖、进气隔栅、水箱护盖、灯座
3、工业零件：椅座、输框、溜冰鞋底座、纺织梭、踏板、滑输
