PEI 1010基础创新塑料价格 货源充足
价格：100.00起
产品规格：
产品数量：
包装说明：
关 键 词：1010基础创新塑料价格,PEI
行 业：塑料 通用/工程塑料 工程塑料
发布时间：2021-06-01
Saber basic innovative plastics (China) Co., Ltd. was established on February 23, 1994. The business scope of the company includes: wholesale of chemical products (except dangerous chemicals); wholesale of plastic products; wholesale of synthetic fiber; manufacturing of primary form plastics and synthetic resin (except for monitoring chemicals and dangerous chemicals); manufacturing of plastic film; manufacturing of plastic plates, pipes and profiles; manufacturing of plastic granules
UL has specified that the long-term service temperature of polyetherimide resin is 338t and 356t (according to grade), and the combustion grade reaches UL94V-0 (10 mil thickness) The oxygen index is 47, and polyetherimide meets the requirements of FAA flame retardant and heat release material standards for aircraft internals. It has a glass transition temperature of 419f and allows intermittent use at 392f, resulting in short-term excursion at higher temperatures. At 356t, the tensile temperature and flexural modulus are above 41 and 2068 MPa respectively. The materials reinforced with glass fiber and carbon fiber have higher strength and stiffness near the glass transition temperature.
The long-term creep resistance of Pei (polyetherimide) under high temperature and stress allows it to replace metals and other materials in many structural devices. It has good electrical properties under variable temperature, humidity and frequency. The low loss factor at GHz makes polyetherimide have high microwave wearability. Its ionic pollutants are of low level, and its conductivity is more than 20 megohm at 250 f R.H. and 207 kPa for 120 hours. It can be used as an insulating material for electronic sensor components.
Pei has strong high temperature stability, even if it is non reinforced Pei, it still has good toughness and strength. Therefore, Pei can be used to make high temperature heat-resistant devices. Pei also has good flame retardant, chemical resistance and electrical insulation properties. The glass transition temperature is very high, up to 215 ℃. Pei also has low shrinkage and good isotropic mechanical properties. Adding glass fiber, carbon fiber or other fillers can achieve the pure of reinforcement and modification; it can also form heat-resistant polymer alloy with other engineering plastics, which can be used for a long time under the working temperature of - 160 ~ 180 ℃. UL stipulates that the long-term service temperature of polyetherimide resin is 338t and 356t. According to the grade, the combustion grade reaches ul94v-010 mil thickness. The oxygen index is 47, and Pei meets the FAA flame retardant and heat release material standards for aircraft internals. It has a glass transition temperature of 419f and allows intermittent use at 392f, resulting in short-term excursion at higher temperatures.
PEI材料性能介绍：
注塑 未增强型 标准 1000,1000F,1000P,1000R
易流动性 1010,1010F,1000R
加颜料的树脂 1100,1100F,1100R ,1110,1110F
中等耐热性 1285,LTX300A,LTX300B
增强型 玻璃纤维增强型 2100,2100N,2100R,2110,2110N,2110R,2200,2200R,2210,2210R,2300,2300N,2300R
2310,2310R,2400,2410,2410R
研磨玻璃纤维增强型 2212,2212R,2312,2313
玻璃纤维/矿物增强型 3451,3452
碳纤维增强型 7201,7801
耐磨性 未增强型 4001
增强型 4000,4211
抗冲击性变化 HTX1010F,HTX1050F,HTX2000F,HTX2001F
耐化学剂性未增强型 CRS5001,CRS5011,CRS5011F,CRS5011R
增强型 CRS5111,CRS5112,CRS5711,CRS5201,CRS5201R,CRS5211,CRS5211R ,CRS5301 ,CRS5311
航空树脂 未增强型 9075,9076
增强型 AR9100,AR9200,AR9300
混合级 PEI/PCE 混合 ATX100,ATX100F,ATX100R,ATX200,ATX200F,ATX200R
PEI/PPO 混合 MD133
挤塑 航空树脂 8015,D9065
我们的优势：
我们的产品均能为客户提供SGS报告与COA出厂报告
我们的市场行情信息准确
我们及时提供售后技术支持
我们的货源充足稳定
