产品规格：
产品数量：
包装说明：
关 键 词：B3ZG3,PA6
行 业：塑料 通用/工程塑料 工程塑料
发布时间：2021-06-01
BASF is a leading chemical company in the world, providing customers with a wide range of high performance products, including chemicals, pstics, specialty products, agricultural products, fine chemicals, crude oil and natural gas. Its unique consortium strategy (i.e. "Verbund" in German) is the company's adtage. It enables BASF to achieve low-cost adtages, thus ensuring a great competitive adtage. BASF follows the principle of sustainable development to conduct its business. In 2002, BASF's sales amounted to 32 billion euros (about 34 billion US dolrs), with more than 89000 employees worldwide. BASF shares are listed on the stock exchanges of Frankfurt (BAS), London (B), New York (BF), Paris (BA) and Zurich (BAS).
工业中的应用：聚酰胺玻纤增强材料可根据产品的特要求添加玻纤含量在5-60%的范围，这类材料具有很好的强度、耐热能、优良的抗冲击能、良好的尺寸稳定及低翘曲等。工业生产中泛用于制造轴承、圆齿轮、凸轮、伞齿轮、各种滚子、滑轮、泵叶轮、风扇叶片、蜗轮、推进器、螺钉、螺母、垫片、高压密封圈、耐油密封垫片、耐油容器、外壳、软管、电缆护套、剪切机滑轮套、牛头刨床滑块、电磁分配阀座、冷陈设备、衬垫、轴承保持架、汽车和拖拉机上各种输油管、活塞、绳索、传动皮带。
PA6 with gss fiber can improve the mechanical properties, dimensional stability, and the gss fiber content is generally 20%. The addition of wear-resistant filler in a certain range can not only improve the wear resistance of modified nylon 6, but also py the role of reinforcing agent, which has the same eff as gss fiber. This is because nylon 6 is a crystalline polymer, and the crystallinity, the density of crystal nucleus and the growth rate of crystal he great influence on the mechanical properties of nylon 6
PA6加工模温：80-90℃，模具温度很显著地影响结晶度，而结晶度又影响着塑件的机械特。对于结构部件来说结晶度很重要，因此建议模具温度为80-90℃。对于薄壁的、流程较长的塑件也建议施用较高的模具温度。模具温度可以提高塑件的强度和刚度，但却降低了韧。如果壁厚大于3，建议使用20-40℃的低温模具。对于玻璃纤维增强材料模具温度应大于80℃。
2018年一季度，巴斯夫集团不计项目的息前收益为25亿欧元，同比增加5,500万欧元，这主要得益于化学品及石油与气业务领域收益大增。销售额同比减少2.11亿欧元，为166亿欧元，由于各业务领域都受到不利汇率因素(-8%)的冲击。更高的销售价格(+5%)，特别是化学品和功能材料与解决方案两个业务领域，以及销量的增加(+2%)对销售额产生了积极影响。除了特产品业务领域之外，其它业务领域销量均有所提升
PA加工因不成熟的技术会使产品能降低，或是成型后达不到制品要求，因此我司有的技术人员为顾客解决加工技术问题，因PA6的型号能不同，价格也会有所不同，所以网上的价格只是参考价，实际价格还请在线咨询或者来电洽谈！晶宏塑胶定将竭诚为您服wu ！
