PEI 1010-7101批发
价格：100.00起
产品规格：
产品数量：
包装说明：
关 键 词：1010-7101批发,PEI
行 业：塑料 通用/工程塑料 工程塑料
发布时间：2021-05-30
Saber basic innovative plastics (China) Co., Ltd. was established on February 23, 1994. The business scope of the company includes: wholesale of chemical products (except dangerous chemicals); wholesale of plastic products; wholesale of synthetic fiber; manufacturing of primary form plastics and synthetic resin (except for monitoring chemicals and dangerous chemicals); manufacturing of plastic film; manufacturing of plastic plates, pipes and profiles; manufacturing of plastic granules
PEI的注塑模工艺条件：
熔化温度：普通类型材料为340～400℃；增强类型材料为340～415℃。
模具温度：107～175℃，建议模具温度为140℃。压力：700～1500bar。
速度：使用尽可能高的速度。
干燥处理：PEI具有吸湿特性并可导致材料降解。要求湿度值应小于0.02%。建议干燥条件为150℃、4小时的干燥处理。
Pei has strong high temperature stability, even if it is non reinforced Pei, it still has good toughness and strength. Therefore, Pei can be used to make high temperature heat-resistant devices. Pei also has good flame retardant, chemical resistance and electrical insulation properties. The glass transition temperature is very high, up to 215 ℃. Pei also has low shrinkage and good isotropic mechanical properties. Adding glass fiber, carbon fiber or other fillers can achieve the pure of reinforcement and modification; it can also form heat-resistant polymer alloy with other engineering plastics, which can be used for a long time under the working temperature of - 160 ~ 180 ℃. UL stipulates that the long-term service temperature of polyetherimide resin is 338t and 356t. According to the grade, the combustion grade reaches ul94v-010 mil thickness. The oxygen index is 47, and Pei meets the FAA flame retardant and heat release material standards for aircraft internals. It has a glass transition temperature of 419f and allows intermittent use at 392f, resulting in short-term excursion at higher temperatures.
Pei plate is an amorphous plastic. It is a kind of amorphous high-performance polymer. It is made of engineering plastics made of amorphous Pei (polyether imide) by high-temperature extrusion of extruder. China Plastics
由于PEI具有优良的综合平衡性能，卓有成效地应用于电子、电机和航空等工业部门，并用作传统产品和文化生活用品的金属代用材料。用PEI取代金属制造光纤连接器，可使元件结构化，简化其制造和装配步骤，保持更的尺寸。用于汽车领域，如用以制造高温连接件、高功率车灯和指示灯、控制汽车舱室外部温度的传感器（空调温度传感器）和控制空气和燃料混合物温度的传感器（有效燃烧温度传感器）。还可用作耐高温润滑油侵蚀的真空泵叶轮、在180℃操作的蒸镏器的磨口玻璃接头（承接口）、非照明的防雾灯的反射镜。
Our strengths:
Our products can provide customers with SGS report and COA factory report
Our market information is first-class and accurate
We provide after-sales technical support in time
Our supply is sufficient and stable
