LG化学PC 1303-10 货源充足
价格：面议
产品规格：
产品数量：
包装说明：
关 键 词：1303-10,LG化学PC
行 业：塑料 通用/工程塑料 工程塑料
发布时间：2021-05-22
LG introduces: LG Group of South Korea was founded in 1947 in Seoul, South Korea, and is located at No. 20, ruyidao cave, yongdengpu District, Seoul city. It is an international enterprise group for industrial development in the world. LG Group has established more than 300 overseas offices in 171 countries and regions. LG, electronics, electronics and other fields of life, including LG, electronics and display
Plastic treatment: the water absorption rate of PC plastic raw materials is large, and it must be preheated and dried before processing. The pure PC should be dried at 120 ℃ and the modified PC should be dried at 110 ℃ for more than 4 hours. The drying time should not exceed 10 hours. Generally, the air extrusion method can be used to judge whether the drying is sufficient. The proportion of recycled materials can reach 20%. In some cases, recycled materials can be used, and the actual amount depends on the quality requirements of the product. The recycled materials should not be mixed with different color masterbatch at the same time, otherwise the properties of the finished product will be seriously damaged.
塑料的处理：PC塑胶原料的吸水率较大，加工前一定要预热干燥，纯PC干燥120℃，改性PC一般用110℃温度干燥4小时以上。干燥时间不能超过10小时。一般可用对空挤出法判断干燥是否足够。再生料的使用比例可达20%。在某些情况下，可的使用再生料，实际份量要视制品的品质要求而定。再生料不能同时混合不同的色母粒，否则会严重损成品的性质。
LG Chemical entered China in 1982 and established 16 manufacturing enterprises and 1 Technical Center in Ningbo, Tianjin and other places. In 2004, LG Chemical established its regional headquarters in Beijing.
As one of the top ten chemical enterprises in the world, LG Chemical has been in China for nearly 40 years. The chemical sector including battery industry is growing rapidly and will maintain a growth rate of more than 10% in the next five years. It is estimated that the sales volume of LG Chemical will reach 52 billion US dollars in 2024. Among them, the Chinese market occupies an important share of 40%.
PC属自熄性材料; 对光稳定，但不耐紫外光，耐候性好; 耐油、耐酸、不耐强碱、氧化性酸及胺、酮类，溶于氯化烃类和芳香族溶剂，长期在水中易引起水解和开裂，缺点是因抗疲劳强度差，容易产生应力开裂，抗溶剂性差，耐磨性欠佳
PC原料订购说明：自接到订单内发货，深圳，惠州，东莞，地区五百公斤以上包送货。一次购买数量500kg以上价格从优，欢迎各界朋友前来订购。
我公司可免费提供SGS、FDA、UL黄卡和物性参数表等资料！
广东省内支持代收货款，省外3天可到货。货物送达后，请时间检查外包装，如发现物流过程中出现大量包装损坏及原料外漏的，请让物流人员出具并保存，并在内与销售部取得联系，对材料有什么不明白的地方请致电我公司销售部，我们将会提供材料的物理性能表及相关的参考加工数据
