Oxygen compressor DRESSER Rod Packing
价格：777.00起
产品规格：
产品数量：
包装说明：
关 键 词：compressor,Oxygen
行 业：机械 泵 往复泵
发布时间：2021-05-12
Reciprocating Compressor Piston Rod Load
In this article, we learn about the Reciprocating Compressor Piston Rod Load – Principle and Calculation method. The compressor rod load exceed the recommended rod load (ie., Combined Rod Load) of a reciprocating compressor leads to major compressor failure. For this reason, it is important to understand the rod load during the design stage and startup of the compressor.
The crosshead pin should have a replaceable bush bearing.
Radial Ring or Pressure Breaker Ring径向环或压力断路器环
The radial ring or pressure breaker ring is cut into three segments so that each cut
lies on the side of a radial direction of the ring. The cuts in the ring are used to
break down the pressure act on the ring. The radial ring is the first ring of road
packing to face the cylinder pressure.
Cross Head十字头
All industrial compressors are equipped with crosshead. The crosshead is used to
guide the piston in the cylinder bore. The following are the advantage of the crosshead.
The connecting rod is made up of forged steel for 150 kW (200 hp) reciprocating
compressor. For compressor less than or equal to 150kW, ductile iron material is
used.
For a horizontally mounted cylinder, along with piston rings, an additional ring called wear band or rider ring is used to lower the wear between cylinder and piston.
