青岛HFRR价格 HFRR试验仪 原装真品 全网低价
价格：23000.00起
产品规格：
产品数量：
包装说明：
关 键 词：青岛HFRR价格
行 业：机械 仪器仪表 试验机设备
发布时间：2019-12-16
The diesel lubricating high-frequency reciprocating tester controller is connected to the computer for the data line. No control chip, control module, and board card are installed in the computer chassis. Therefore, when the computer fails, the user can replace any other brand computer at any time. After installing the test operation software, you can use it.
Including:
1, constant temperature and humidity control device
2, constant temperature and humidity insulation test box body.
3, with 2 reinforced drying tubes.
Overall requirements:
According to the ISO 12156.1-2018 ASTM D6079-2018 test method, used for the lubrication performance evaluation test of diesel engine fuel(including diesel fuel containing lubrication performance modifiers). The operation of the automatic constant temperature and humidity system is simple and easy, and the corresponding control area can be activated by clicking on the main control interface. No other operation steps are required. After the test is completed, the sampling data in the experimental process is closed and stored, and the operator's operation steps are reduced. Increased efficiency.
In 2016, Beijing Gaoke, as a manufacturer of high frequency reciprocating test machines for diesel lubrication evaluation, participated in the drafting of the national standard(standard number: GB/T 3537-2017) for high frequency reciprocating test machines for diesel lubrication evaluation. The standard was issued on December 29, 2017. Implemented on July 1, 2018.
Operating ambient temperature: 17 to 35 °C, operating ambient humidity: 5-95 %; (Temperature and humidity can be set and adjusted by self)
The high frequency reciprocating stroke limit protection device fixes the shaft rod under static conditions to prevent damage to the spindle when installing the test parts. The device effectively protects the vertical of the shaft rod and the vibrator, and at the same time guarantees the grating reading counter. The corresponding position of the ruler, Prevent the influence of external force damage on the stroke control.
At the same time, the allowable division(temperature and humidity) of the test environment in the ASTM D6079-2018,ISO 12156.1-2018 standard is drawn into a standard template. During the test process, it can be called up at any time to facilitate comparison with the standard requirements to obtain more accurate test data.
Test operation software platform: The system includes test operation, test automatic control, data real-time monitoring, data calculation, formation report, parameter calibration and data browsing after test are all completed in the software, and all Chinese are marked.
-/gbafaeb/-
