德国BOY精密注塑机,BOY 55 AVV注塑机,德国BOY精密注塑机,BOY

价格：面议

0

联系人：

电话：

地址：

产品规格：德国BOY精密注塑机,BOY 55 AVV注塑机,德国BOY精密注塑机,BOY

产品数量：

包装说明：

关 键 词：德国BOY精密注塑机,BOY 55 AVV注塑机,德国BOY精密注塑机,BOY

行 业：塑料 塑料机械 注塑机 

发布时间：2015-06-24

BOY简介：
    德国BOY公司成立于1968年，经营高效，长期专业生产锁模力较低的系列注塑机。在该市场占据了独一无二的地位，至今已累计生产Boy注塑机超过40000台。BOY注塑机可以加工热塑料、弹性体、热固性塑料和粉体，生产陶瓷和金属部件。代理机构遍布全世界70多个国家。BOY设备能够进行最优化装配，产品保持高质量水平。BOY公司受过高级培训的专业服务工程师遍布全球各地，服务快捷方便。
BOY 55 A VV
 
With the introduction of the BOY 55 VV insert moulding machine, BOY have expanded their range of machines.  As with the successful BOY 22 VV and BOY 35 VV models, the design of the new BOY 55 VV is based upon proven technology.

A clamping force of 550 kN, as well as shot weights up to 158.9 g (PS) max.

Generously spaced tie bars (360 x 335 mm) allow the mounting of both large and family moulds.

Low table height (distance between fixed lower platen and floor) of 975 mm.

The fixed lower platen was achieved by turning the standard horizontal machine′s two-platen clamping unit by 90 degrees. This advan-tageous configuration prevents the move-ment
of insert parts during the mould-closing phase of the cycle!

Compact dimensions and ample space for peripheral equipment on the machine sup-port guarantee optimum opportunities for integration into automated production lines.

MORE ENERGY EFFICIENT. QUIETER. FASTER. MORE PRECISE.

Advantages

· Compact design with little floor space needed

· Procan ALPHA? full-touch control

· Servo-motor pump drive

· Lateral swivel out injection unit

· Optimum L/D ratio of the screw

· Plasticizing units for thermoplastics, thermoset, LSR, and elastomer processing

· Four tiebar, cantilevered two-platen clamping system

· Generous tie bar and platen distances

· Most exact positioning of the moving platen via proportional valve

· Easily accessible ejector at the rear of the moving platen