价格：面议
0
联系人：
电话：
地址：
产品规格：
产品数量：
包装说明：
关 键 词：束载网
行 业：
发布时间：2010-10-19
该载网主要应用于离子刻蚀。在离子束下不干扰EDS的X射线峰，对样品可起到良好的保护作用。 The Omniprobe® Lift-Out Grids are specifically designed to accept the TEM lamellas milled out by FIB or SEM/FIB systems. Typical thickness of the grids is 25-30µm with a diameter of 3mm. The posts are designed for optimum access and provide a secure area for attaching (welding) the lamella(s). The Omniprobe grids fit standard TEM holders and provide a non-obscured view of the thin sections attached to the posts. Description Unit Omniprobe Lift-Out Grids, Cu with 3 posts pkg/100 Omniprobe Lift-Out Grids, Cu with 3 posts, shallow downset pkg/100 Omniprobe Lift-Out Grids, Mo with 3 posts pkg/25 Omniprobe Lift-Out Grids, Cu with 3 posts and side access pkg/100 Omniprobe Lift-Out Grids, Cu with 4 posts pkg/100 Omniprobe Lift-Out Grids, Mo with 4 posts pkg/25 Omniprobe Lift-Out Grids, Cu with 5 posts pkg/100 Omniprobe Beryllium Half Ring Grids, Be pkg/10 GSB-100 Storage Box for 100 Omniprobe grids, complete with base, lid and clips each FIB Grid Box for Lift-Out Grids or Half Grids GSB-100 Storage Box for 100 Omniprobe grids, complete with base, lid and clips Four position grid box with lid for holding FIB lift-out grids or half grids. The grid box cavity depth is only 1.7mm, thus preventing the grids from rotating in the diamond shaped cavity. The FIB grids can be relatively easily loaded/unloaded using sharp tweezers. 4 Position FIB Grid Box with Lid each
