价格：1起
0
联系人：
电话：
地址：
Quick Search W. No. N/A UNS No. N/A AISI No. N/A EN X210CrW12 Sverker 3 High alloyed tool steel suitable for medium and long run tooling in applications where a very good abrasive wear resistance is needed. Sverker 3 contains large carbides which are advantageous for abrasive wear resistance but which reduce the chipping resistance. This material conforms to EN X210CrW12. Benefits Sverker 3 is a tool steel offering good tooling economy for medium run tooling when the cost of the tool is a significant portion of the total cost for producing the required number of parts Sverker 3 is very useful in applications with very high demands on abrasive wear but where demands on chipping resistance are small, e.g. for the blanking of electrical sheets containing hard silicon oxide particles, slitting of paper and foils Sverker 3 is a tool steel with good tooling economy for medium to long run tooling in special applications where a very high abrasive wear resistance is needed ~ The coarse carbides make Sverker 3 particularly suitable for applications where the wear is created by coarse abrasive particles as in brick pressing, tile pressing, and in the compacting of ceramic materials in general Normal working hardness range 58-62 HRC. Properties Very high wear resistance (abrasive type wear profile) High hardness and compressive strength Good hardenability Low resistance to chipping and cracking Application examples Blanking of thin, hard, abrasive materials such as electrical sheet Paper and foil slitting Powder compacting of ceramics Tablet pressing Dies for brick, tile and grinding wheel pressing Click on Download for product brochures, case studies and other product related information
