价格：150起
0
联系人：
电话：
地址：
聚四氟乙烯高温布 我公司采用优质进口玻璃纤维为编织材料，进行平纹，斜纹，缎纹或采用其它织法编织成高级玻璃纤维布基材，再经独特的工艺技术，反复充分浸渍，涂覆优质特氟龙树脂，生产各种厚度多种超宽的特（铁）耐高温漆布和焊布。 我公司可以提供自然棕色及黑色的特氟龙耐高温布，厚度从0.08毫米到1.2毫米。 聚四氟乙烯高温布的特点： 1、用于低温-196℃，高温360℃之间，具有耐气候性,抗老化。经实际应用,如在250℃高温情下连续放置200天，不但强度不会变低，而且重量也不减少；在380℃ 高温下放置120个小时，重量只减少0.6%左右；在-180℃超低温情况下不会产生龟裂，并保持原有的柔软性。 2 、非粘着性：不易粘附任何物质。易于清洗附着其表面的各种油渍，污点或其它附着物；浆糊、树脂、涂料等几乎所有粘着物质都可简单地清除。 3、耐化学腐蚀，能耐强酸、强碱、王水及各种有机溶剂的腐蚀。 4、摩擦系数低（0.05-0.1），是无油自润滑的最佳选择。 5、透光率达6～13 ％。 6、具有高绝缘性能（介电常数小：2.6，正切在0.0025以下）、防紫外线、防静电。 7、尺寸稳定性好（延伸系数小于5‰）、强度高。具有良好的机械特性。 8、耐药剂性、无毒性。几乎可耐所有药剂物品。 9、防火阻燃。 聚四氟乙烯高温布的应用范围： 1、抗粘的内衬、垫片、蒙布和输送带；根据厚度不同，用于各种烘干机械的输送带，粘合带，封口带等。 2、塑料制品焊接，焊封用的焊布；塑料片、膜、热封压片衬带。 3、电气的高绝缘：电气绝缘带基、隔片、垫片、衬圈。高频覆铜板板。 4、耐热包复层；叠层基材，隔热体包扎。 5、微波垫片、烤炉片、食品烘干。 6、粘合带，转移印花烫台布，地毯背胶固化输送带，橡胶硫化输送带，磨料片固化离型布等。 7、压敏胶带基布。 8、建筑膜材：各种运动场所的顶蓬、车站亭蓬、阳伞、景观蓬等。 9、用于各种石油化工管道的抗腐蚀包复，电厂废气的环保脱硫等。 10、柔性补偿器、摩擦材料、砂轮切片。 11、特殊加工后可制作 “防静电布”。 款号 颜色 厚度 最大宽度 克重 抗拉强度 耐温范围 Q3008AJ 棕 0.08mm 1250mm 165 g/m² 130/120N/cm -140至360℃ Q3008BJ 黑 0.08mm 1250mm 170 g/m² 130/120N/cm -140至360℃ Q3008Y 银粉 0.08mm 1250mm 185 g/m² 130/120N/cm -140至360℃ Q3013AJ 棕 0.13mm 1250mm 260 g/m² 220/190N/cm -140至360℃ Q3013BJ 黑 0.13mm 1250mm 275 g/m² 220/190N/cm -140至360℃ Q3013Y 银粉 0.13mm 1250mm 290 g/m² 220/190N/cm -140至360℃ Q3018AJ 棕 0.18mm 1250mm 395 g/m² 330/250N/cm -140至360℃ Q3018BJ 黑 0.18mm 1250mm 415 g/m² 330/250N/cm -140至360℃ Q3025AJ 棕 0.25mm 4000mm 490 g/m² 410/330N/cm -140至360℃ Q3025BJ 黑 0.25mm 4000mm 510 g/m² 410/330N/cm -140至360℃ Q3035AJ 棕 0.35mm 3200mm 660 g/m² 560/445N/cm -140至360℃ Q3035BJ 黑 0.35mm 3200mm 680 g/m² 560/445N/cm -140至360℃ Q3040AJ 棕 0.40mm 3500mm 780 g/m² 820/500N/cm -140至360℃ Q3040BJ 黑 0.40mm 3500mm 820 g/m² 820/500N/cm -140至360℃ Q3065AJ 棕 0.65mm 4000mm 1150 g/m² 1080/750N/cm -140至360℃ Q3100AJ 棕 1.00mm 4000mm 1550 g/m² 1500/1250N/cm -140至360℃ Q3090BJ 黑 0.90mm 4000mm 1650 g/m² 1500/1250N/cm -140至360℃ We use best imported Fiberglass as the weaving material to plain knit or specially knit into superior fiberglass basic cloth, coat it with fine PTFE resin then make it into various of Teflon high temperature resistance cloth in different thickness and widths. specifications of PTFE teflon fabric: Item No Color Thickness Max width weight Tensile strength Temperature Q3008AJ borwn 0.08mm 1250mm 165g/m² 130/120N/cm -140 to 360℃ Q3008BJ black 0.08mm 1250mm 170 g/m² 130/120N/cm -140 to 360℃ Q3008Y black 0.08mm 1250mm 185 g/m² 130/120N/cm -140 to 360℃ Q3013AJ brown 0.13mm 1250mm 260 g/m² 220/190N/cm -140 to 360℃ Q3013BJ black 0.13mm 1250mm 275 g/m² 220/190N/cm -140 to 360℃ Q3013Y black 0.13mm 1250mm 290 g/m² 220/190N/cm -140 to 360℃ Q3018AJ brown 0.18mm 1250mm 395 g/m² 330/250N/cm -140 to 360℃ Q3018BJ black 0.18mm 1250mm 415 g/m² 330/250N/cm -140 to 360℃ Q3025AJ brown 0.25mm 2800mm 490 g/m² 410/330N/cm -140 to 360℃ Q3025BJ black 0.25mm 2800mm 510 g/m² 410/330N/cm -140 to 360℃ Q3035AJ brown 0.35mm 3200mm <660 g/m² 560/445N/cm -140 to 360℃ Q3035BJ black 0.35mm 3200mm 680 g/m² 560/445N/cm -140 to 360℃ Q3040AJ brown 0.40mm 3500mm 780 g/m² 820/500N/cm -140 to 360℃ Q3040BJ black 0.40mm 3500mm 820 g/m² 820/500N/cm -140 to 360℃ Q3065AJ brown 0.65mm 4000mm 1150 g/m² 1080/750N/cm -140 to 360℃ Q3090AJ brown 0.90mm 4000mm 1550 g/m² 1500/1250N/cm -140 to 360℃ Q3090BJ black 0.90mm 4000mm 1650 g/m² 1500/1250N/cm -140 to 360℃ Teflon (PTFE) fabric Teflon (PTFE) fabric is made up of high-capability fiberglass which has steeped into PTFE. It is a new product with high capability and multiform function of complex material. Fiberglass fabric coated with PTFE has various good capability and it is widely used in aircraft industry, paper manufacture, food, environment protection, print and painting, costume, chemical, glass manufacture, medical, electronic, insulation, building (basic cloth of topping frame), sharpener slice, machinery, etc. Main capability and characteristics: 1.It can be used under the temperature of － 196 ℃ to 360 ℃, which has the capability of weather resistant and age resistant. Under practical situation of high temperature of 250 ℃ for 200 days, not only the intensity will not decrease, the weight will not reduce; if put it under the high temperature of 350 ℃ for 120 hours, the weight only decreased by about 0.6%; under the situation of -180 ℃, it will not chap and keep the original pliability; 2.Hardly to adhere any material; it is easy to wash away the blot or other dust such as resin, coating material, etc. 3.Chemical corrosion resistant, it could resist acid, alkali, aqua fortvarious kinds of organic liquid corrosion; 4.Low ratio of friction (0.05-0.1), it is the best choice of non-oil lubricator; Light piercing ratio is 6-13%; 5.High capability of insulation (small permittivity: 2.6, the tangent is lower than 0.0025), ultraviolet resistance, static prog; 6.Good dimension stability (the ratio of extending is lower than 0.5%), High intensity, good mechanical capability; Capability of medicament resistant and non-poison, almost to resisting all kinds of medicament; Fireproofing and flame resisting. Applied range: 1. Internal gasket, cushion, covering fabric, conveyer belt which resisting viscidity; base on the different thickness, it could be used as conveyer belt, conglutinating belt, sealing belt of various kinds of drying machine; 2. welding of plastics, welding cloth for solder; plastic patch, membrane, belt of heat enveloping patch; 3. High insulation of electric: insulating belt of electric, septa, cushion, gasket. High frequency plank coated with copper; 4. heat resisting envelope, terrace base-material, enswathing of heat insulation; 5. micro wave gasket, oven gasket, food drying; 6. glue belt, shifting stamp tablecloth, blanket backing-glue belt, rubber vulcanize belt, etc; 7. fabric of heat-variable glue; 8. construction membranous material: sorts of ceiling of gymkhana, station ceiling, parasol, and sight ceiling; 9. binding of all sorts of petroleum and chemical pipeline to resist eroding, environmental sulfur separating of exhaust gas of electric factory; 10. bland compensator, rubbing material, slice of grinding wheel; 11. it could be made into static resisting fabric. Note: We could produce different kinds of fiberglass fabric coated with PTFE according to different application request, for example: 1. ordinary industry grade: the textile of this grade is with good capability of heat resistant, antisepsis, non-viscidity; 2. standard grade: it is made of import material, besides having the grate capability of antisepsis and heat resistant, the surface is more smoothly and it has better non-viscidity capability. It could be used in ordinary industry field, and has better predominance on being used as plastic module separating, and separating patch, gasket, separating module of some products. 3. food grade: the surface is smoothly, good capability of resisting viscidity, heat resisting, easy wash, and it is more safety to be used on food industry; 4. static resisting grade (fabric of static resisting): besides the capability of fiberglass fabric coated with Teflon, by special process, it has the capability of resisting static which to satisfy the request of customers. Main sorts and specifications: Thickness: 0.06-1.0mm; Structure of basal fabric: plain, diagonal, satin, etc. Width: 1000-4200mm; Color: brown, white, black, black-argent; Way of coating: double-faced coating, single-faced coating, ventilate coating, static resistant coating.
