产品规格:
产品数量:
包装说明:
关 键 词:51单片机烧录接口怎么焊接
行 业:电子 电子产品设计
发布时间:2023-01-01
ATtiny88 Automotive 8-bit AVR Microcontroller with 8K Bytes In-System Programmable Flash DATASHEET Features High performance, low power AVR 8-Bit microcontroller Advanced RISC architecture 123 powerful instructions most single clock cycle e...
ThePC7 and PC[5:0] output buffers have symmetrical drive characteristics with both sink and sourcecapability. As inputs, Port C pins that are externally pulled low will source current if the pull-upresistors are activated. The Port C pins are tri-stated when a reset condition becomes active,even if the clock is not running.1.1.7PC6/RESETIf the RSTDISBL Fuse is programmed,
PC6 is used as an I/O pin. Note that the electrical char-acteristics of PC6 differ from those of the other pins of Port C.If the RSTDISBL Fuse is unprogrammed, PC6 is used as a reset input. A low level on this pin forlonger than the minimum pulse width will generate a reset, even if the clock is not running. The
minimum pulse length is given in Table 22-3 on page 209. Shorter pulses are not guaranteed togenerate a reset.The various special features of Port C are elaborated in “Alternate Functions of Port C” on page72.1.1.8Port D (PD7:0)Port D is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each bit).
As inputs, Port A pins that are externally pulled low will source current if the pull-up resistorsare activated. The Port A pins are tri-stated when a reset condition becomes active, even if theclock is not running.This port is available in 32-lead TQFP, 32-pad QFN and 32-ball UFBGA packages, only.1.1.5Port B (PB7:0)Port B is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). ThePort B output buffers have symmetrical drive characteristics with both sink and source capability.As inputs, Port B pins that are externally pulled low will source current if the pull-up resistors areactivated.
The ATtiny48/88 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISCarchitecture. By executing powerful instructions in a single clock cycle, the ATtiny48/88 achievesthroughputs approaching 1 MIPS per MHz allowing the system designer to optimize power con-sumption versus processing speed.