3M82-F1/82-F2/82-BF电缆电缆接续绝缘防水灌胶中间接头

价格：面议

海郑实业（上海）有限公司

联系人：张明鹤

电话：+8613761135753

地址：洞泾镇莘砖公路3366号1幢八层

产品规格：

产品数量：

包装说明：

关 键 词：82-BF防水接头,82-F2防水中间接头

行 业：化工 合成树脂 聚氨酯树脂 

发布时间：2022-10-05

3M82-F1/82-F2/82-BF电缆电缆接续绝缘防水灌胶中间接头

注：因市场会有变化，具体按照实际询价以及合同为准。

产品描述：3M Scotchcast™ 柔韧电力电缆连接套件是一系列的内联和分支接头，用在非铠装便携式的电力电缆和电线。它们的设计可以被用在电压高达5kv的单芯和多芯电缆以及电线上。连接点可容纳单芯电缆,尺寸高达120平方毫米的内联拨节和50平方毫米的分支拨节。多导体上浆是基于一个电缆直径范围，高达30mm的内联拨节和21mm的分支拨节。该连接套件是以Scotchcast 2131化合物（材料）的韧性，柔韧性，防潮密封和阻燃性为基础的，它们是由矿业安全健康管理所认证分配的*性连接套件（P-142-5 MSHA ¹）。完整的连接套件被用于露天，直埋或淹没的位置，尤其是水下缆、水下 连接器、铠装缆、矿井缆的连接或修补时做外护套使用，它的*特配方特别能承受水下和矿井的恶劣条件。

套件组成部分：每个套件包含足够的下列材料用来修复接头或电缆（套件不包含连接器）。

  ------ 一体式可移动模具

  -----Unipak袋装 Scotchcast 2131化合物

  ------Scotchcast™胶带用于密封模具末端

  -----砂布（目数80J 细沙）

  -----全面的说明指出了安装技术，如何正确的连接非铠装便携式电力电缆和电线

3M Scotchcast 82-F and 82-BF Series Flexible Power Cable Splicing Kits are a series of flexible inline and tap splices for use on non-shielded portable power cables and cords. They are designed to be used on single and multiple conductor cables and cords rated up to 1000 Volts (600/2000 Volts mine portable cable rating). The 82-F Series will accommodate a single-conductor cable rated up to 5 kV. The splices will accommodate single-conductor cables sized up to 4/0 for inline splicing and up to 1/0 for tap splicing. Multi-conductor sizing is based on a cable diameter range of up to 1.2 inches for inline splicing and up to 0.8 inches for tap splicing.

The splice kits are based on Scotchcast 2130 Compound for toughness, flexibility, moisture sealing and flame retardancy. They are permanent splices as assigned by the Mine Safety and Health Administration (P-l42-5 MSHA). The completed splices are designed for use in weather exposed, direct burial or submerged locations.

Kit Contents:
Each kit contains sufficient quantities of the following materials to make one splice or cable repair (connectors are not included in kit):
- One-piece removable mold
- Scotchcast 2130 Compound in "Unipak" container
- Scotch 23 Tape, for sealing mold ends
- Abrasive cloth (80J grit)
- Comprehensive instructions showing proper installation techniques for splicing non-shielded portable power
cables and cords.

Applications:

To join or re-jacket non-Armoured portable power cable and portable cords

For inline single-conductor cables rated up to 5kV

For branch single-conductor cables rated up to 1000V

For inline and branch multi-conductor cables rated up to 1000V

For mine portable cable rated 600/2000V (P-145-5 MSHA)

For use with compression inline connectors (82-F) and compression “C” branch connectors (82-BF)

For jacket repairs

For indoor and outdoor applications: Weather exposed /Direct burial /Submerged / Cable reels

Each kit contains sufficient quantities to make one splice or cable repair (connectors are available separately)

82BF-1可挠性电力电缆岐路接头 （Flexible Power Cable Tap Splicing）
82-F1及82-F2用於无遮蔽、可挠性电力电缆之直路接续
其电压等级为5KV（单蕊电缆）或1000V（多蕊电缆）
此接头系以绝缘胶做绝缘、防水及耐磨之主要部份

每一接头包含下列组件：
1组 单体式可剥离式外膜（one-piece removable mold）
1卷 防水胶带（sealing tape）
1条 砂布（abrasive cloth）
1袋 绝缘胶（2130 compound）
此组件不包含压接套管（connector）

3M82-F1 82-F2 82-BF 灌胶阻水接头安装示意图