价格:面议
广州华粤电缆有限公司
联系人:杨永华
电话:+8613044224548
地址:广州市天河区燕岭路89号499室E87号
电缆安装时的轴向允许牵引力T(不考虑转弯处的径向侧压力)
Maximum allowable axial traction for cable installation, T(radial side pressure at bend not being considered导体:TK×导体截面(
Conductor: T=K x Conductor section (kg)
式中系数K值为,铜导体K=7kg/m2,铝导体K=4kg/m
Where, the coefficient K= 7kg/mm for copper conductor and 4kg/mm for aluminum conductor●电缆弯曲时的允许侧压力 P Maximum allowable side pressure when cable is bent. PP=T/R≤500(kg/m),式中T为轴向牵引力,R为弯曲半径
P=T/R<500(kg/m), where T is axial traction, and R is bending radius电缆额定电压的表示方法 Expression method for rated voltage of cable电缆的额定电压用UU(U)表示,均为有效值,单位为kV.如;Uuu(U)=127220(252)The rated voltage of cable is expressed with Uo/U(U), and it is an effective value wirh a unit of kV For example. UA/U(U-)a127/220(252)Uo- The rated power frequency voltage between the conductor and the shield or the metal armor, used for cable designU—电缆设计用的导体与屏蔽或金属套之间的额定工频电压