价格:面议
台州艾菲力塑胶有限公司
联系人:郑总(Rainy)
电话:13857609010
地址:浙江省台州市三门县西区开发区
一些厂家由于熔焊器放不正,熔焊时管端加热就不正,芜湖ppr管件,连接易发生歪斜,以后在长时间的运行时,由于热应力作用而出现泄漏。
Uk Gafloon Pipe Group Ltd,销售PPR管、PVC管道等产品,ppr管件,详情欢迎来电咨询访问。
Due to the improper placement of the welding device in some manufacturers, the heating of the pipe end is not correct during the welding, and the connection is prone to skew. In the long-term operation, the leakage occurs due to the effect of thermal stress.
Uk Gafloon Pipe Group Ltd sells PPR pipes, PVC pipes and other products. For details, please call us.
冷热水管不要同槽
水路改造时,冷热水管要不要同槽,而且两者之间距离保持10cm以上。如果热水管紧挨冷水管,会降低热水管的保温性,热水很快就会变冷。这里还要提醒大家,水管开槽较深,ppr管件管材,要避免开开横槽,横槽会破坏墙体结构。
Hot and cold water pipes should not be in the same tankIn waterway rectruction,PPR地暖管件, whether the cold and hot water pipes should be in the same groove, and the distance between them should be kept at least 10 cm. If the hot water pipe is close to the cold water pipe, the heat preservation of the hot water pipe will be reduced, and the hot water will soon become cold. Here also reminds everybody, the water pipe groove is deep, must avoid to open the transverse groove, the transverse groove will destroy the wall structure.
ppr水管打压试验
在ppr水管的水路改造好后,一定要做好打压试验。**会需自己在现场,并且实际观察压力是否下降,我们可以在接头处裹上报纸,有漏水可以轻松发现。不要等着水泥都铺上了,才去打压试水。
Pressure test of PPR water pipeAfter the transformation of PPR water pipe, the pressure test must be done well. If there is an opportunity, we need to be actually observe whether the pressure drops. We can wrap a newspaper around the joint and easily find the leakage. Don"t wait for the cement to be laid before you test the water.