Compressor Basics Components shanghai
价格：777.00起
温州盛义机械制造有限公司
联系人：程**
电话：17757794797
地址：浙江省温州龙湾区永中街道坦头村工业园
产品规格：
产品数量：
包装说明：
关 键 词：Basics,Components,Compressor
行 业：机械 泵 往复泵
发布时间：2021-09-16
Poppet Type Valve
Plate Type Valve
Ring Type Valve
Poppet Valve
Reciprocating Compressor Basics ComponentsThe poppet valve is used for low-speed
compressor and gas contain oil particles. The poppet valves are high lift valves, due
to high lift the pressure drop across the valve is low.
Bearing
The main and connecting rod bearings should be split-sleeve, steel-backed, babbitted
insert type. Antifriction bearing shall be used for compressor rating less than
150kW. As per API-618 trapper roller bearings are used as the main bearing for
compressor rating less than 150kW.
The compressor can use narrow piston, due to the use of narrow piston larger valve area for greater efficiency.
Tangent Ring切线环
The tangent ring is cut into three segments so that each cut lies on the side of an
equilateral triangle. The cuts of this ring maintain sealing contact regardless of
variations of the ring’s inside diameter. If wear occurs in the tangent ring, the
garter spring will tighten the ring segments to compensate for the wear.
Tangent Ring Radial Ring or Pressure Breaker Ring Backup ring.
Contents
1 Cylinders
2 Piston
3 Piston Rod
4 Distance Piece
5 Rod Packing
5.1 Tangent Ring
5.2 Radial Ring or Pressure Breaker Ring
5.3 Backup Ring
6 Crank Shaft
7 Bearing
8 Connecting Rod
9 Cross Head
10 Valve
10.1 Poppet Valve
10.2 Plate Type Valve
10.3 Ring Type Valve
11 Lubrication System
