COCK Carbon monoxide compressor
价格：777.00起
温州盛义机械制造有限公司
联系人：程**
电话：17757794797
地址：浙江省温州龙湾区永中街道坦头村工业园
产品规格：
产品数量：
包装说明：
关 键 词：Carbon,compressor,monoxide
行 业：机械 泵 往复泵
发布时间：2021-09-10
Lubrication System
Force type lubrication is used for the medium and heavy-duty compressor. The main
component of the force type lubrication is the main oil pump, dual oil filter, lube
oil cooler, pressure regulating valve, lube oil tank and its associated accessories.
Splash type lubrication is used for the small compressor(up to 100kW). This type of
system lubricating oil by the splashing of crank-throw moving through the lubricant
in the sump.
Permits a longer stroke and greater capacity.
Separates crankcase from the cylinder, allowing control of oil carryover into the cylinder.
Bearing
The main and connecting rod bearings should be split-sleeve, steel-backed, babbitted
insert type. Antifriction bearing shall be used for compressor rating less than
150kW. As per API-618 trapper roller bearings are used as the main bearing for
compressor rating less than 150kW.
Tangent Ring Radial Ring or Pressure Breaker Ring Backup ring.
Rod Packing活塞杆填料
Rod packing is required to prevent the gas leakage along the piston rod where it
passes through the crank end cylinder closure.
Cylinders气缸
The cylinder is a pressure-retaining part of the reciprocating compressor. The cylinder accommodates both suction and discharge valves. For smaller capacity reciprocating compressor (up to 100kW), the cylinder is directly connected to compressor frame. For larger capacity reciprocating compressor (above 100kW), the cylinder is connected to compressor frame through distance piece.
