美国杜邦PA66 FR52G30LX价格 送货上门
价格：26.00起
产品规格：
产品数量：
包装说明：
关 键 词：FR52G30LX价格,美国杜邦PA66
行 业：塑料 通用/工程塑料 工程塑料
发布时间：2021-07-22
晶宏塑胶的经营理念：诚信经营，顾客至上；
晶宏塑胶的政策：客户的一份满意，我们的不遗余力；
晶宏塑胶的宗旨：为客户提品，良好的技术支持，健全的 ；晶宏塑胶竭诚于每一位客户，真诚期待与你合作，共创发展，共赢未来
Zytel PA66 / 6 uses pstics for sporting goods:
Helmet manucturer DXL protion chooses DuPont ™ Zytel Nylon resin is due to its high resistance, rigidity and toughness. This super tough nylon is reinforced with 33% gss fiber. The four helmet parts made with Zytel are the , the C-shaped "buckle" around the head and two side s. The patented four part design makes the helmet more suitable for the head than the traditional one part helmet.
PA66 process: drying: if the material is sealed before processing, there is no need to dry. However, if the storage container is opened, drying in hot air at 85 ℃ is recoended. If the humidity is higher than 0.2%, vacuum drying at 105 ℃ for 12 hours is required. Melting temperature: 260 ~ 290 ℃. For gss additive products, 275 ~ 280 ℃. The melting temperature should not be higher than 300 ℃.
PA66具有优良的耐磨、自润滑，机械强度较高。但吸水较大，因而尺寸稳定较差
PA66 has excellent wear resistance, self lubrication and high mechanical strength. However, the size stability is poor because of its high water absorption
PA66工艺：干燥处理：如果加工前材料是密封的，那么就没有必要干燥。然而，如果储存容器被打开，那么建议在 85℃ 的 热空气中干燥处理。如果湿度大于 0.2%，还需要进行105℃，12 小时的真空干燥。 熔化温度：260~290℃。对玻璃添加剂的产品为275~280℃。熔化温度应避免** 300℃。
相关说明：我司出库的材料保证原厂，同时我们还提供业务范围内的技术支持！面对广大新老客户我们做到以，的价格优势竭诚为您。我们的目标是你的满意就是我的成功。欢迎来电咨询洽谈：销售部联系人--蒋R
