价格：1000起
东莞市百航仪器有限公司
联系人：肖宇
电话：18922972636
地址：一村路726号3栋102室
百航双轮轮椅车疲劳寿命试验机 轮椅车检测设备-BH-147轮椅车动态疲劳测试机---双辊疲劳测试机 Baihang double wheel wheelchair fatigue life testing machine wheelchair testing equipment bh-147 wheelchair dynamic fatigue testing machine double roller fatigue testing machine一、本机概述： 轮椅车动态耐用性试验机依据标准制作，对轮椅车进行路况疲劳实验，目测轮椅车损坏程度。本机适用于使用者自己操纵和护理者操纵的手动轮椅车以及室内型和室外型电动轮椅车。电动轮椅车有三个或三个以上安装在两根平行传动的轴上的轮子，驱动轮不多于两个，速度不大于5km/h。本机采用plc触摸屏控制可设置行驶的速度，行驶距离。可设置双滚，到达设定的距离自动停机。 Overview of this machine: the dynamic durability test machine for wheelchair is made according to the standard, and the road fatigue test is carried out for wheelchair, and the damage degree of wheelchair is visually measured. This machine is suitable for manual wheelchair and indoor and outdoor electric wheelchair operated by users and nurses. The electric wheelchair has three or more wheels installed on two parallel transmission shafts, with no more than two driving wheels and no more than 5km / h speed. This machine adopts PLC touch screen to control the speed and distance of driving. Double roll can be set to automatically stop at the set distance. 二、主要技术参数： 1.**品牌plc+触摸屏程序控制;可设置行驶的速度，测试的转数等， 2.设备较大负载100kg; 3.采用闽台台达变频器+电机+减速箱各2套，保证性能的稳定性，可单独控制。 4.可显示转数，速度，行走距离等。到达设定转数自动停机‘ 5.速度1m/s_+0.1m/s可调。即0-4公里/小时 6.具有停电自动保存测试记录 7.障碍物高度6mm可换。 8.电源三相220v,50hz。 9.电机功率：3kw 10.转轮直径: ∮250+-25mm.宽度800mm 11.机台配置斜坡平板，方便轮椅车的安装。 12轮子中心距调节距离: 350～900mm，采用丝杆导轨方便调节。 13.机台采用刚性材料焊接，表面喷塑防锈处理，保证机台的稳定性和美观大方 14.长宽高约：2200*1200*2000 15.独立中央控制箱，方便操作，保证电器的耐用性和安全性能。1. Famous brand PLC + touch screen program control; can set the driving speed, test speed, etc, 2. The maximum load of the equipment is 100kg; 3. Two sets of Taiwan delta frequency converter + motor + reducer are used to ensure the stability of performance, which can be controlled separately. 4. It can display revolution, speed, walking distance, etc. Automatic stop after reaching the set revolution‘ 5. The speed is 1 m / s μ + 0.1 M / s adjustable. 0-4 km / h 6. With automatic test record of power failure 7. The height of the obstacle is 6mm, which can be replaced. 8. Power supply three-phase 220V, 50Hz. 9. Motor power: 3kw 10. Runner diameter: ∮ 250 + - 25mm. Width 800mm 11. The machine is equipped with ramp plate to facilitate the installation of wheelchair. 12. Adjustment distance of wheel center distance: 350-900mm, easy to adjust with screw guide rail. 13. The machine is welded with rigid materials, and the surface is sprayed with plastic to prevent rust, so as to ensure the stability and beauty of the machine 14. Length, width and height: 2200 * 1200 * 2000 15. Independent central control box, easy to operate, ensuring the durability and safety performance of electrical appliances.