价格：1000起
东莞市百航仪器有限公司
联系人：肖宇
电话：18922972636
地址：一村路726号3栋102室
BH-150滑板车动态耐用性试验机 一、 产品说明： 二、 本机依据CNS6263-11 BS EN14619 设计制造,其目的是模拟滑板车，溜冰鞋路况运动时底轮及车体之动态耐用之程度(亦可用来作其它类产品之试验),为改善动态耐用性之质量提供可靠之依据。本机是通过马达带动链轮运动,从而带动滚筒转动,并通过调节马达转速改变滚筒之转速来达到测试目的。According to cns6263-11 BS EN14619 The purpose of the design and manufacture is to simulate the dynamic durability degree of the bottom wheel and the body when the scooter and skate are moving on the road (it can also be used for the test of other products), so as to provide a reliable basis for improving the quality of dynamic durability. This machine drives the chain wheel through the motor, so as to drive the drum to rotate, and changes the speed of the drum by adjusting the motor speed to achieve the test purpose. 二、产品规格: 1.滚筒直径: Ф720, 长1米 2.冲击块个数: 12个 3.定时器: 0—999999小时,具有秒、分、时转换及停电记忆功能 4.计速器: LED显示,输送带的速度以km/h显示 5.电机功率: 3P 6.机台尺寸: （2050X1300X2100）mm 长x宽x高 7.重量: 约300KG 8.电源: AC220V 50HZ1. Drum diameter: Ф 720, 1 m long 2. Number of impact blocks: 12 3. Timer: 0-999999 hours, with second, minute, time conversion and power failure memory function 4. Speedometer: LED display, speed of conveyor belt in km / h 5. Motor power: 3P 6. Machine size: (2050x1300x2100) mm length x width x height 7. Weight: About 300kg 8. Power supply: AC220V 50Hz