价格：3起
广州市银标贸易有限公司
联系人：赖强平
电话：13922125860
地址：广东省广州市番禺区钟村街道广州市番禺区钟村南国奥园小资天堂1座2层223A室
汽车电池加热采用正温度系数PTC自限加热系统
Heating made safer
SafeHe - Tc is based on IE’s more than 20-year experience with thin foil technology
for various sensor applications. Due to the fact that PTC technology increases resistance
at higher temperatures, it is considered failsafe with regards to overheating. Moreover this
thin surface heating technology is exempt from “hot spots” and extremely reliable.
Less is more
As the system’s PTC technology makes an electronic control unit (ECU) or thermostat unnecessary,
the costs and integration effort of offering this feature are reduced.
Positive Temperature Coefficient (PTC) resistance technology
The PTC-heating elements consist of electrically
conductive carbon pigments, which are printed
on a flexible film via screen printing process.
That technology enables us to adapt the heater
design for various applications, including complex
3D shapes.
A typical characteristic of PTC inks is that they
change their specific electrical resistance with
an increase in temperature and are therefore
self-limiting to avoid overheating
加热更安全
SafeHeat基于IE在薄膜技术上20多年的经验
适用于各种传感器应用。由于PTC技术会增加电阻
在较高温度下，就过热而言，它被认为是故障安全的。而且这个
薄表面加热技术不受“热点”的影响，并且非常可靠。
少即是多
由于该系统的PTC技术*使用电子控制单元（ECU）或恒温器，
提供此功能的成本和集成工作量减少了。
正温度系数（PTC）电阻技术
PTC加热元件由电组成
导电碳颜料，已印刷
通过丝网印刷工艺在柔性薄膜上。
这项技术使我们能够适应加热器
针对各种应用（包括复杂应用）的设计
3D形状。
PTC墨水的典型特征是它们
用改变电阻率
温度升高，因此
自我限制以避免过热