价格：面议
广州万举机械有限公司
联系人：邓显钟
电话：13926264803
地址：广东省广州市花都区雅瑶镇新区东路自编4号之四-万举工业园内
油加热器厂家_镁合金压铸模温机价格_广州万举机械有限公司
>>机型特点 Main feature
● 较高使用温度320℃ Highest temperature reaching 320℃
● 按键式操作面板，操作简单 The panel control adopted micro, easy operation
● 采用连轴式热媒油泵浦，泵浦流量大，使用寿命长 usehot oil pump of axis-connection type with big flow rate and long service life
● 可指 定选用德国KSB、德国SPECK、德国ALLWEILER热媒油泵浦 KSB, SPECK, ALLWEILER hot oil pump from Germen is available
● 采用TAT法兰式球阀及法兰式过滤 器 TAT flanged ball valves and flange type filter
● “OMRON”、“SCHNEIDER”控制零件 Controlling parts of OMRON, FUJI brand
● 自动排气和带手动模具回油功能 Full automatic exhaust function and manual mode die oil return function
● 出油温度显示 temp. indication of oil output and return
● 多段加热控制，功率可自行调整 multi-zone heating control with power self-adjusting function
● 电气配电箱采用双重隔离及散热设计 Double-insulation/heating dissipation design for the electric distributioin cabinet
● 减少废品率、减少加热时间、增加模具/模板寿命 Increase the service life of mold/ templet and reduce the waste rate and the heating time
● 特殊管路系统设计，传热油不氧化，寿命长Special design for pipeline system in which the heat-transfer oil is not oxidized with a long lifecycle.
● 采用高温保温材料隔热处理，节约能源及热量损失小High-temperature insulation materials can be adopted on the heat insulation so as to save energy and reduce heat loss.
● 故障指示，维修不用专业人员Fault indication function which allows maintenance without professional maintainers.
>>安全保护系统 Safety system
● 总电源过电流无熔丝断路器 Circuit breaker
● 异常警告指示灯系统 Alarm system
● 马达反转保护及指示灯 motor rollback protective lamp
● 异常警告蜂鸣器 Alarm sounding
● 缺油保护及指示灯Oil lack protective lamp
● 保温隔热处理 Insulation heating system
● 过热保护及指示灯 over-heat protective
● 回油温度显示表Oil reture display
● 循环泵浦过载保护及指示灯Circuiting pump overload protective lamp
● 电源欠相保护 Power protection
● By-Pass油压回路 By-pass hydrauic circuit
.万举机械///油加热器厂家_镁合金压铸模温机价格_广州万举机械有限公司