价格:面议
扬州瑞杰企业贸易有限公司
联系人:蔡悦
电话:15152735685
地址:江苏省扬州市区施经济开发桥镇聚贤路26号
产品规格:RBZ-F
产品数量:
包装说明:
关 键 词:小型翻斗车
行 业:
发布时间:2014-08-29
简介General Description 此动力单元专为小型翻斗车设计,由高齿轮油泵、直流电机、多用集成块、电磁阀、油箱等零件组成系统。在没有电时,手动泵可以实现上升动作,下降由电磁卸荷阀卸荷实现。 This power unit is designed exclusively for the tipper,Consisting of high pressure gear pump, DC motor,a multi-functional manifold,valves and tank,etc.The hand pump with a displacement of 8cc per strore works as a back up power source for lifting the machine in case of power failure. 说明: 1.如需不同流量的泵、压力、电机功率等系统参数,请查看液压动力单元型号说明。 1.Remark:1.Please go to page 1 or consult our sales engineer for the different pump displacement,motor power or tank capacity. 2.如需手动应急放油装置,请在订货时说明。 2.The manual override function is available on request. 注意事项Special Notes 1.本动力单元为S3工作制,不可连续运转,30秒开,270秒停。 1.The duty of this power unit is S3,ie.,30seconds on and 270 seconds off. 2.安装前必须保证油缸、油管、接头等液压元件清洁无任何杂质粘附。 3.Clean all the hydraulic parts concemed before mounting the power unit. 3.液压油粘度应为15-68CST,应清洁无杂质,推荐使用N46号液压油。 3.The viscosity of the oil shoud be 15-68 cst. 4.系统使用**个100小时后,应更换液压油,以后每3000小时更换一次液压油。 4.Change the oil after the first 100 hours of using the power unit,then change the oil every 3000 hours. 5.本液压动力单元适用于水平安装。 5.The power unit should be mounted horizontally.