价格：110800$起
青岛海诺奥科工贸有限公司
联系人：徐亮
电话：13583235239
地址：青岛
Model PZ-9 mud pump is a horizontal triplex single acting piston pump which has the advanced structure and small in size. It has the reliable performance, good exchangeability, easy maintenance.
The pump consists of two main sections: power end & fluid end. Power end includes pump case pinion shaft, crankshaft, back cover, connection rod, crosshead etc.
Fluid end includes valve pot assembly, valves, cylinder liners, pistons, discharge manifold and suction manifold. Etc.
In order to prevent the water-hammer and reduce pressure difference in the outlet side,of the pump.
In order to prevent the over-pressure, there fixed a shear safty valve in the outlet side of the pump.
The gears, bearings, crosshead in the power end adopt splash system and pressure lubrication system. This guarantees a good lubrication.
The cylinder liners & the pistons in the fluid end is cleaned and cooled by a centrifugal spray pump with lubrication water.
This pump has a complete set of special tools for general maintenance & repair.
2 Technical Specifications
(1) Type: horizontal triplex single acting piston pump.
(2) Rated input power 1000HP
(3) Rated speed: 130SPM
(4) Stroke length 9”(228.6mm)
(5) Rated speed of pinion shaft 582 rpm
(6) Gear ratio: 4.48:1
(7) Valve standard: API7#
(8) Suction inlet 10”
(9) Discharge outlet 5 1/8”(5000PSI)
(10) Overall dimension 205X94X100.5in (5200X2388X2550MM)
(11) Pump weight 44050 ib(20000kg)
3 Technical Performance
Relations between pressures, displacement and speed.
Pump speed(spm) Liner Size (in)
7 6 3/4 6 1/2 6 5 1/2 5 4 1/2 4
Theoretical Displacement (gal/min)
130 585 504 466 430 361 298 242 191
Pressure(psi) 2639 3060 3310 3592 4272 5000 5000 5000
Ratings are based on 90% mechanical efficiency and ** volumetric efficiency.