价格：面议
0
联系人：
电话：
地址：
产品规格：
产品数量：
包装说明：
关 键 词：MSO5104
行 业：
发布时间：2011-04-28
Tektronix MSO5104 1GHz带宽示波器 产品名称: Tektronix MSO5104 1GHz带宽示波器所属品牌: Tektronix泰克 编号网址: 1303789084/product/oscilloscope/Tektronix-MSO5104.html 复制网址 产品Tektronix MSO5104 1GHz带宽示波器的技术参数和随机配件简述：Tektronix MSO5104示波器自动触发、解码和搜索功能，迅速调试常见串行总线– I2C, SPI, RS-232/422/485/UART, USB2.0。 专有的FastAcq™技术，迅速发现毛刺和偶发事件。>250,000波形/秒的最大捕获速率，快速显示难检异常事件。 Tektronix MSO5104示波器53种自动测量、测量统计、直方图和高级波形数学运算，分析设备。 简便地搜索、标记和导航长记录长度，找到事件发生的所有时点。 Tektronix MSO5104示波器自动触发、解码和搜索功能，迅速调试并行总线。高达60.6 ps的定时分辨率，捕获快速跳变。 350多种触发组合，包括建立时间/保持时间触发、串行数据包触发和并行数据触发，迅速捕获异常信号。 Tektronix MSO5104示波器标配抖动和眼图分析及十几种电源分析、存储器分析等选配软件包，把示波器转换成专用应用仪器。 标配4只探头，提供了业内最佳的4pF电容负荷，保证准确测量。 Tektronix MSO5104示波器在一台仪器上分析模拟信号和数字信号，在系统级调试复杂的设计。 Vertical System Analog Channels Input Channels Analog Bandwidth (–3 dB): 1 GHz Calculated Rise Time: 350 ps DC Gain Accuracy ±1.5%, derated at 0.10%/°C above 30°C Bandwidth Limits Depending on instrument model: 1GHz, 500MHz, 350MHz, 250MHz, and 20MHz Input Coupling AC, DC Input Impedance 1 MΩ ±1%, 50 Ω ±1% Input Sensitivity 1 MΩ: 1 mV/div to 10 V/div 50 Ω: 1 mV/div to 1 V/div Vertical Resolution 8 bits (11 bits with Hi Res) Max Input Voltage, 1 MΩ 300 VRMS CAT II, with peaks ≤ ±425 V For <100 mV/div derate at 20 dB/decade above 100 kHz to 30 VRMS at 1 MHz, 10 dB/decade above 1 MHz For ≥100 mV/div derate at 20 dB/decade above 3 MHz to 30 VRMS at 30 MHz, 10 dB/decade above 30 MHz Max Input Voltage, 50 Ω 5 VRMS, with peaks ≤ ±20 V Position Range ±5 divisions Delay between any Two Channels (Typical) ≤100 ps (50 Ω, DC coupling and equal V/div at or above 10 mV/div) Offset Range Range 1MΩ 50Ω 1mV/div to 50mV/div ±1V ±1V 50.5 mV/div to 99.5 mV/div ±0.5V ±0.5V 100 mV/div to 500 mV/div ±10V ±10V 505 mV/div to 995 mV/div ±5V ±5V 1 V/div to 5 V/div ±100V ±5V 5.05 V/div to 10 V/div ±50V n/a Offset Accuracy ±(0.005 × |offset – position| + DC Balance) Note: Both position and constant offset term must be converted to volts by multiplying by the appropriate volts/div term Channel-to-Channel Isolation (Any two channels at equal Vertical Scale settings) (Typical) ≥100:1 at ≤100 MHz and ≥30:1 at >100 MHz up to the rated BW Vertical System Digital Channels Input Channels 16 Digital (D15 - D0) Thresholds Per-channel Thresholds Threshold Selections TTL, ECL, User User-defined Threshold Range ±40V Maximum Input Voltage ±42Vpeak Threshold Accuracy ±(100 mV + 3% of threshold setting) Input Dynamic Range 30 Vp-p ≤200 MHz 10 Vp-p >200 MHz Minimum Voltage Swing 400 mV Input Impedance 100 kΩ Probe Loading 3 pF Vertical Resolution 1 bit Horizontal System Analog Channels Maximum Sample Rate (All channels) 5 GS/s Maximum Sample Rate (1 or 2 channels) 10 GS/s Maximum Record Length (All channels) Standard Config. 12.5M points (4 channels) 25 M points (1 or 2 ch) With Option 2RL 25M points (4 channels) 50M points (1 or 2 ch) With Option 5RL 50M points (4 channels) 125M points (1 or 2 ch) With Option 10RL 125M points (4 channels) 250M points (1 or 2 ch) Maximum Equivalent Time Sampling Rate 400 GS/s Maximum Duration at Highest Sample Rate 25 ms Time Base Range 250 ps/div to 1000 s/div Time Resolution (in ET/IT mode) 2.5 ps/div Time Base Delay Time Range –5 divisions to 5000 s Channel-to-Channel Deskew Range ±75 ns Time Base Accuracy ±5 ppm over any ≥1 ms interval Trigger Jitter (RMS) ≤10 psRMS for Edge trigger type ≤100 psRMS for all Non-edge trigger types Horizontal System Digital Channels Maximum Sample Rate (Main) 500 MS/s (2 ns resolution) Maximum Record Length (Main) 12.5M Standard Up to 40M with Record Length options Maximum Sample Rate (MagniVu) 16.5 GS/s (60.6 ps resolution) Maximum Record Length (MagniVu) 10k points centered around the trigger Minimum Detectable Pulse Width (Typical) 1ns Channel-to-Channel Skew (Typical) 200 ps Maximum Input Toggle Rate 500 MHz at minimum input swing; higher toggle rates can be achieved at higher amplitudes
