供应5U96芯ODF

价格：面议

宁波西尖光通讯设备有限公司

联系人：冯振怀

电话：13615744790

地址：宁波市宁海桥头胡工业区

产品规格：

产品数量：

包装说明：

关 键 词：5U96芯ODF

行 业：

发布时间：2014-06-05

光纤配线箱
ODF 光纤熔接配线单元盒，又称ODF配线箱，是用于光缆 引入、固定和保护、光缆终端与尾纤熔接，用户可根据实际需求选配单元数量或法兰盘数量.
1.	产品结构：
光纤熔接配线单元盒由外壳、内部构件、光纤接头保护件3部分组成。
1.1外壳：外壳方便开启，便于安装。
1.2内部构件包括以下部分：
1.2.1支撑架：内部结构的主体，用于内部结构的支撑； 
1.2.2集纤盘：用于有顺序地存放光纤接头（及其保护件）和余留光纤，可余留光纤的长度不小于1.6m，余留光纤盘放的曲率半径不小于32mm。并有为重新接续提供容易识别纤号的标记和方便操作的空间； 
1.2.3固定装置：用于光缆护套固定、光缆加强构件固定和配线尾纤固定。
1.2.4 光纤接头的保护采用热收缩保护管。
2. 外观：
光纤熔接配线单元盒形状完整，无毛刺、无气泡、无龟裂和空洞、无翘曲、无杂质等缺陷。全部底色应均匀连续。经静电喷塑处理，其色泽应均匀一致无划痕和露底。
3. 材料：
光纤熔接配线单元盒中，所有的塑料部件采用的材料具有防腐性能，金属部件采用静电喷塑处理，以增加其防腐蚀性能；材料的物理、化学性能稳定并且材料之间有良好的相容性。
3.1热收缩保护管采用的材料及填充物的热熔温度不小于120℃，热软化温度大于90℃，使用温度：-25℃～+40℃。 
3.2全部材料无毒、无腐蚀，对人体健康和其它设备**。
4. 结构特点：
4.1用19″标准安装界面，适用于多种机架、机柜上的安装 
4.2采用金属结构，表面涂装静电喷塑，结构轻巧，外形美观 
4.3全模块化设计，全正面化操作，安装灵活、施工维护方便 
4.4抽拉式设计，集熔接配线一体化的熔接配线模块 
4.5适用于束状和带状光缆 
4.6每盘可卡式安装12个FC，FC(双芯)，SC，及ST适配器,适配器正面呈30°角，既保证拉光纤的曲率半径，又可避免激光损伤眼睛。
4.7模块可取出至设备外操作，简单方便
4.8光缆和尾纤均具有2m以上的盘储空间

主要技术参数：   
环境要求：
 1）工作温度：-5℃～+40℃
2）环境温度：－40℃～＋60
3）相对湿度：≤85%（+30℃） 
4）大气压力： 70Kpa～106Kpa
5）贮运温度：-25℃～+55℃ 
光电性能： 
1）介入损耗：≤0.3dB 
2）回波损耗：PC≥40 dB UPC≥50 dB APC≥60 dB 
3）箱体与接地装置之间绝缘电阻：＞1000MΩ/500VDC 
4）箱体与接地装置之间耐电压：3000VDC/1min不击穿，无飞弧 
工作指标： 
1）标准工作波长：850nm 1310nm 1550nm 
2）光纤活动连接器： 插拔500次后： 
无机械损伤，插针表面无明显划痕 
a)介入损耗：≤0.3dB，附加损耗变动量不大于0.2dB 
b)回波损耗：PC≥40 dB UPC≥50 dB APC≥60 dB，附加损耗变动量不大于5dB

型号	尺寸	高度(U)	较大容量(芯)	备注
GPJ02-A5/96	225×485×345	5	96	12芯一体化模块
GPJ02-A4/72	180×485×285	4	72	12芯一体化模块
GPJ02-A3/48	132×485×342	3	48	12芯一体化模块
GPJ02-A2/24	90×485×285	2	24	12芯一体化模块
GPJ02-A1/12	44.5×485×285	1	12	12芯一体化模块



Fiber Management Tray also called ODF Distribution Box, Integrated Splicing and Distribution ODF.

It is mainly used for cable inlet, grounding and fixing and the splicing between the terminal end and pigtail. Users can select unit or ring flange amount according to their practical needs

1. Products components: cover, inner components, and fiber connecting protector Inner components: 
1.1 Cover: the cover should be easily opened for the convenience of installation;
1.2 Inner components:
1.2.1 Bracket: the main component, used for supporting the inner structure
1.2.2 Fiber Optic Splice Tray: to store the spliced fibers, protectors and the spare fibers, with the length being about no shorer than 1.6m; the curvature radius of the coiled spare fiber being no less than 32mm; Easily recognizable marks of series numbers and adequate room should be provided for operation of re-splice fibers.; 
1.2.3. Fixing Device: used for the fixation of fiber protective jacket, reinforced components of fiber cable and distribution pigtails; 
1.2.4.The heat shrink protective sleeves are used to protect the spliced fibers

2. Appearance: The shape should be complete, no burr, no air bubble, no chap, no hole, no edge or impurity; the grounding should be evenly-colored with static electric plastic sprayed and the color should be continuous, no nick or dew point.

3. Material: all components made from plastic should be of excellent anti-corrosion performance, all components made from metal should be static plastic sprayed around; the physical and chemical capabilities of the material should be stable and should be compatible with each other.
3.1 The melting temperature for the material used for the heat shrinkable protective sleeves and the packing should be no lower than 120°C, the intenerate temperature is higher than 90°C, the usage temperature: -25°C - 40°C;
3.2 All material should be innocuous, none-corrosion, no side effects to human health or other equipments.

4. Features of the structure:
4.1 19"standard mounting, could be used for all kinds of rack and cabinet;
4.2 Metal, static electric plastic sprayed, neat appearance, reasonable structure;
4.3 All are designed as modules; all operation could be done at the front side of the box; flexible installation, convenient for operation and maintenance;
4.4 Designed as a drawer, which could be pulled out and pushed in easily; an unit with splice and distribution integrated;
4.5 Suitable for both ribbon & bunch fiber cables;
4.6 Every tray can be clamped with 12 FC, FC (Duplex), SC or ST adaptors, 30°oblique installation, preventing eyes from harm of laser and ensuring the fiber bending radius.
4.7 The trays could be pulled out for operation, which makes installation easy and convenient;
4.8 All fiber cables and pigtails have more than 2m room to storage.
Main technical Parameter                                           
  
Environmental condition:
 1) Working temperature: -5°C - +40°C
2) Environmental temperature: -25°C - +55°C                                      
  3)Relative humidity:  ≤85%((when the temperature is below 30°C))
4)Atmosphere pressure:   70 Kpa～106Kpa
5) Storage temperature:  -25°C - +55°C

Photo electricity Performance: 
1) Insertion loss: ≤0.3dB
2) Return loss:  PC≥40 dB   UPC≥50dB   APC≥60dB                                      
  3) Insulating resistance between the box and the earthing device:1000MΩ/500VDC
4)Voltage-resistance between the box and the earthing device:  Under the effect of 3kv/DC/1min, non-puncture, and no arc-over.
Working Indexes:
1)Standard working wavelength: 850nm, 1310nm, 1550nm;
2) Fiber movable connector:
 After 500times of insetion:
a)	No mechanical damage, no obvious nich on the surface of the needle;
b)	Insertion loss: ≤0.3dB, the additional loss change is on more than 0.2dB
Return loss: PC≥40 dB   UPC≥50dB   APC≥60dB, the additional loss change is no more than 5dB
  
Type	Dimension	Height(U)	Capacity(F)	Remarks
GPJ02-A5/96	225×485×345	5	96	12F splice & distribution integrated
GPJ02-A4/72	180×485×285	4	72	12F splice & distribution integrated
GPJ02-A3/48	132×485×342	3	48	12F splice & distribution integrated
GPJ02-A2/24	90×485×285	2	24	12F splice & distribution integrated
GPJ02-A1/12	44.5×485×285	1	12	12F splice & distribution integrated